• Make sure that the first intercom panel is connected to the BUS A and BUS B terminals on the monitor stand.
• Ensure that the second intercom panel is connected to the ADD A and ADD B terminals on the monitor stand.
• By default, street panels are set to intercom panel.

• Position the monitor on its stand

It is recommended necessary for 2 people to carry out the procedure, as immediately after powering up the device, you will need to be in front of intercom panel.

• Plug in the mains adapter or switch on the associated circuit breaker.
• If your device is already powered up, please remove the power supply and reconnect it.

• Immediately after powering up the monitor, press the bottom button () on intercom panel and hold it down for 30 seconds until you hear a beep on the monitor. intercom panel
• The intercom panel is now configured as a secondary intercom panel.
• Make sure that when you press the secondary intercom panel, DOOR2 is displayed on the monitor.

• In the event of an error, or if you wish to reconfigure your intercom panel as main, you will need to follow almost the same procedure.

It is recommended necessary for 2 people to carry out the procedure, as immediately after powering up the device, you will need to be in front of intercom panel.

• Plug in the mains adapter or switch on the associated circuit breaker.
• If your device is already powered up, please remove the power supply and reconnect it.

• Immediately after powering up the monitor, press the top button (backlit nameplate) on intercom panel and hold it down for 30 seconds until you hear a beep on the monitor. intercom panel
• The intercom panel is now configured as the main intercom panel
• Make sure that when you press the secondary intercom panel, DOOR1 is displayed on the monitor.