In this tutorial we will look at how to delete items stored in the radio memory of the AVLO electronic board.
The electronic board can store a maximum of 15 remote control buttons.
If the radio memory is full, it will not be possible to add other radio elements to it.
The board has an animation of LEDS informing you of this status when programming is attempted.
When confirming step 1 by pressing the OK button briefly, instead of the L1 and L4 LEDs flashing, the board will rapidly light up all its red LEDs twice.
It is not possible to delete just one remote control. This procedure will erase all elements stored in the card. Make sure you have all the radio elements in your possession so that you can reprogram them following this procedure.
Press the “-” button on the circuit board for 3 seconds. The red L1 LED lights up.
Press the “+” button on the card twice. LED L3 lights up.
Press “OK” once. All red LEDs light up.
Hold down the “OK” button for several seconds, until you see the red LEDs animate.
The radio memory on your electronic board has now been reset.
