\

Programming remote controls on a CA2B9 card – Pedestrian/partial opening

This tutorial explains how to program and delete remote controls on an Avidsen CA2B9 card.

This tutorial is applicable for:

Difficulté : Easy

Temps nécessaire : 1 minutes

Nombre d’étapes : 7

Mise à jour : February 2025

PARTIAL OPENING: Press the “-” button on the control board for 3 seconds (L1 lights up on the board).

PARTIAL OPENING: Press “+” once

(L2 lights up).

PARTIAL OPENING: Press the “SET” button on the card once (L1 and L5 flash).

PARTIAL OPENING: Press the desired remote control button for one second (all LEDs light up and go out).