\

Manual thermostat operation – 127062

Manual thermostat operation – 127062

If you'd like to use the thermostat in Manual mode, here's a tutorial.

This tutorial is applicable for:

Difficulté : Easy
Temps nécessaire : 5 minutes
Nombre d’étapes : 2
Mise à jour : October 2025

Tutorial steps:

Activate manual mode

  • From the main menu, press the up or down arrow once to display the manual mode logo.
  • Manual mode will show a hand on the bottom right of the thermostat.
  • The manual mode will operate like a conventional thermostat.
  • The thermostat temperature can be adjusted via its setpoint (SET).
  • To increase the setpoint temperature, press the up arrow.
  • To reduce the setpoint temperature, press the down arrow.
  • The thermostat’s temperature sensor displays the exact room temperature in the ROOM tab.

Caution: if you handle the thermostat by hand, the room temperature may be higher and the values incorrect.

  • If the setpoint temperature is lower than the room temperature, the thermostat will not activate and will not start your heater.
  • If the setpoint temperature is higher than the room temperature, the thermostat will activate and start up your heater.
  • A symbol will appear on the thermostat.

Appendix

  • You can calibrate the temperature sensor temperature and hysteresis. Please refer to the advanced rule tutorial.