Skip to content
  • English
    • French
    • Italian
    • Spanish
    • German
    • Dutch
    • Portuguese (Portugal)
    • Greek
    • Polish
  • English
    • French
    • Italian
    • Spanish
    • German
    • Dutch
    • Portuguese (Portugal)
    • Greek
    • Polish
Logo Avidsen
  • Products
    • Products
    • Avidsen Brand
    • Extel Brand
    • Philips Brand
    • Thomson Brand
  • Support
    • Tutorials on repair and use
    • Avidsen Technical Support
    • Extel brand technical support
    • Philips technical support
    • Thomson Technical Support
  • The Group
    • The Group
    • Contact
  • Ethic Company
  • Where to buy ?
  • Products
    • Products
    • Avidsen Brand
    • Extel Brand
    • Philips Brand
    • Thomson Brand
  • Support
    • Tutorials on repair and use
    • Avidsen Technical Support
    • Extel brand technical support
    • Philips technical support
    • Thomson Technical Support
  • The Group
    • The Group
    • Contact
  • Ethic Company
  • Where to buy ?
\

Connect photocells to an AVLO board

  1. Home
  2. Connect photocells to an AVLO board

Connect photocells to an AVLO board

This tutorial will show you how to connect photocells to an AVLO electronic board.

This tutorial is applicable for:

Avidsen - 114170 - Stryrka 310 / Avidsen - 114173 - Teha 410 / Avidsen - 114174 - Teha Connect / Avidsen - 114200 - Orane 410 / Avidsen - 114201 - Orane 510 / Avidsen - 114202 - Orane Connect / Avidsen - 114300 - Teha 320 / Avidsen - 114301 - Stryrka 320T / Avidsen - 114302 - Orane 420
Difficulté : Easy
Temps nécessaire : 15 minutes
Nombre d’étapes : 1
Mise à jour : February 2025

Explanations in video:

Tutorial steps:

Foreword

The tutorial below will show a connection with the current 114359 oval photocells.

The old photocells 104359 (Extel), or 114359 rectangular will be compatible with an AVLO electronic board.

The connection will be identical except for the photocells 104359.

Connection photocells 104359 and 750534

Remove the shunt between GND and PHO from the circuit board.

Connect the +24V of the photocells to the +24V of the board.

Connect the GND of photocells to the GND of the board.

Connect the NC of the RX photocell to PHO on the board.

Connect a shunt between GND and COM on the receiver photocell.

Connection to photocells 114359

Remove the shunt between GND and PHO from the circuit board.

Connect the + of photocells to the +24V on the board.

Connect the – of the photocells to the GND of the board.

Connect the NC of the RX photocell to PHO on the board.

Connect a shunt between – and COM on the receiver photocell.

Keep in touch
Youtube Linkedin

Follow us on social networks

About Avidsen
  • Who are we?
  • Contact
  • Who are we?
  • Contact
Support
  • Avidsen Technical Support
  • Extel brand technical support
  • Philips technical support
  • Thomson Technical Support
  • Avidsen Technical Support
  • Extel brand technical support
  • Philips technical support
  • Thomson Technical Support
Avidsen group brand
  • Avidsen Brand
  • Extel Brand
  • Philips Brand
  • Thomson Brand
  • Avidsen Brand
  • Extel Brand
  • Philips Brand
  • Thomson Brand
Copyright 2025 © All rights reserved Avidsen
  • Legal Notice
  • Personal data protection policy
  • Terms and Conditions of Use
  • Legal Notice
  • Personal data protection policy
  • Terms and Conditions of Use
Thank you for your rating!
Thank you for your rating and comment!
This page was translated from: French
Please rate this translation:
Your rating:
Change
Please give some examples of errors and how would you improve them: