Soria 4 solar panels kit, 480 watts connected station - Avidsen - 127137
Take the plunge into solar power and save energy by generating your own electricity! Soria, the Avidsen solar station with four solar panels for a total output of 480 watts, and simplified installation, will enable you to wipe out the consumption stub of your electrical appliances during the day.
Product reference: 127137
EAN : 3345111271374
Advantages of the 4 Soria 480 watt solar panels connected to Avidsen Home
The benefits of solar station installation
From A to Z, installation of the Soria solar station is simplified. The cardboard box will fit in your car. And it takes less than thirty minutes to install on the ground. Finally, you can place your panels on any flat surface: conventional ground, terrace or lawn. Connect them to a standard outdoor electrical outlet and you’re ready to go!
Installation recommendations
Please note that it is prohibited to install the solar kit on a pitched roof or a flat roof. It is also mandatory to install the panels in a row, preferably facing due south. Otherwise, opt for a southeast or southwest orientation. Allow for a space of 2.4 m² to install the panels, securing them firmly to the sturdy mounts provided for this purpose.
Why use a solar power supply?
With a Soria solar power system, you can eliminate the standby power consumption of appliances that run all day long. You can use your oven, washing machine, streaming device, and light with movement detection as usual, without driving up your electricity bill. Note that you can also add a second kit if needed.
A connected solar station
Soria is a connected solar station paired with the Avidsen Home application. Start your home automation project or complement your existing home accessories with an alternative power solution. In either case, you’ll be able to :
- track your electricity production
- compare your production from one month to the next
- view your production history
Discover the kit contents
- 4 solar panels, 120 watts each
- balcony clamps
- 1 inverter
- 1 panel connection cable, length 2.50 m
- 1 x 3 m power cable
- screws and bolts required for installation
- mounting hardware: 1 open-end wrench 10 and 13 // 2 Allen keys M6 and M8