GUIDE TO GOOD PRACTICE IN THE USE OF YOUR SOLAR-POWERED PRODUCTS
- Please follow the installation instructions at instructions.
- Do not use multi-socket outlets. Plug your panels into a standard 230V 2P+T =2-pole + earth socket protected by a 30mA/16-amp differential current device. NFC 15-100 standard.
INSTALLATION
- If you’re adding an extension cord, make sure it complies with CE standards and is designed for outdoor use. We recommend adding a watertight box for the connections.
- Avoid installing your solar panels in high-traffic areas. Do not install on a roof, as there is a risk of falling and serious injury.
- Be sure to weight the products according to the instructions indicated. Install your panelsin a place protected from any external aggression (projection pebblesfollowing lawn mowing, brushcutter, balloons, trees, animals…).
- Do not install solar panels in a flood flood zone.
- In hot, sunny weather, the panels can become hot, posing a risk of burns. Likewise, avoid tall, dry grass near the panels to limit the risk of fire.
- Before starting your installation, you must inform your distribution network operator.
- Depending on the type of installation you wish to make, check with your local council to see if any formalities are required.
- If your solar equipment exceeds a total of 3,000 W, a Consuel certificate is required. Please contact your grid operator and an electrician to find out how.
PRECAUTIONS
- If the product is broken or damaged (impact, cracks, damage to electrical cables by rodents, dogs, etc.), please stop using it, as this may cause unwanted damage.
- In the event of a storm (wind > 100 km/h) or hail, we recommend that you unplug the equipment and move it to a safe place.
USE
- Before cleaning, unplug or switch off the device. Clean with a soft cloth only, no solvents.
- End-of-life management: solar panels, inverters and brackets can be recycled. Please dispose of them separately.
- Do not disassemble housings or other electronic components.
SPECIAL PRECAUTIONS FOR STORAGE BATTERIES
- Before cleaning, unplug or switch off the device. Clean with a soft cloth only, no solvents.
- End-of-life management: solar panels, inverters and brackets can be recycled. Please dispose of them separately.
- Do not disassemble housings or other electronic components.
